Photo Emulsion Remove Method
1.Apply to both sides with paintbrush.
Scrub with a nylon bristle brush.
2.Apply again to both sides. Let stand in a
horizontal position for three to five minutes.
3.Scrub with a nylon bristle brush while
spraying with a forceful stream of hot water.
Photo Emulsion should be washed out of your
screen as soon as your print run is completed – unless you want a permanent
stencil.
Wear rubber gloves and smock. Adult
supervision is recommended for this procedure.
Be specific all the ink has been eliminated
from the screen textile. Apply Photo Emulsion Remover freely to both sides of
the stencil making use of a paintbrush. Immediately scrub both sides of the
stencil with a dry nylon bristle brush. Again, Picture Emulsion Eliminator
liberally to both sides of the stencil. Maintain the display in a straight
placement for 3 minites. Rub both sides with the nylon bristle brush and also
flush with a hard spray of hot water. As soon as you have begun getting rid of
Picture Solution you must not allow the display dry till entirely tidy.
Using Screen Filler is another simple means
of preparing a screen for printing. The screen filler is used to block out
those areas that you do not wish to print. This allows the ink to be forced
through the screen wherever the Screen Filler has not been applied.
Washing Soda dissolved in one gallon of
water is also suitable.
没有评论:
发表评论